FLECTR becomes wearable – Welcome to our campaign no. 10!
Jogger, biker or pedestrian – FLECTR CLIP is right for you. Catch any car driver’s attention before it’s too late.
Just clip one of these reflectors under your bike saddle, attach it magnetically to your clothing or simply slip it over the strap of your commuter bag.
All FLECTR CLIPs are flexible and virtually indestructible. The best thing about them is that both sides are reflective! The highly reflective microprismatic film – manufactured in Europe – ensures maximum safety. Clip on, pull off – done within seconds.
The strap mount version fits any webbing up to 52 mm (2″) width. Front color: fluorescent lime green, back: silver.
FLECTR CLIP for saddle mount is the ideal rear reflector for almost any bike. We have chosen a special color (neon red-orange) for this reflector. It reflects almost twice the amount of light as classic red. Its backside reflects silver, like all other CLIPs.
The magnetic CLIP is a little workhorse. With its strong built-in magnet, it can be worn on any clothing, (a counter-magnet is supplied), or attached to bike bags and steel surfaces. Front color: fluorescent lime green or orange, back: silver.
FLECTR CLIP works fatigue-free and has a long lifecycle over many years.
Effective but small – barely larger than a credit card, it fits into any wallet.
Under the name Portland reflector, a series of wearable reflectors was developed by mechanical engineer Erik Roby. Although his ingenious idea didn’t immediately ignite here on Kickstarter, he refined his concept and successfully equipped many cyclists and outdoor enthusiasts in the following years.
After Erik had turned to other projects, we decided to reissue these super useful safety accessories and add some new features. We contacted Erik a while ago and he was thrilled that his idea would find its way back into the community. Erik, here we go!
FLECTR reflectors are widely known in the biker community with over 13.000 backers on Kickstarter in recent years.
There´s no need to to choose a type now. After the campaign has ended, we will ask you for all details in a survey together with your address for shipment.
STRAP MOUNT: 116 x 62 mm /// SADDLE MOUNT: 86 x 62 mm /// MAGNETIC MOUNT: 86 x 62 mm +++ Reflection technology: high-grade cube corner prisms /// We use raw materials from European production. These are rugged, have an excellent life span and reach us by short delivery routes. Our packaging comes without blisters and other plastics. /// The FLECTR CLIP design is protected by law.
Reflectors have a clear advantage over electric lighting – they do not require maintenance and are still there for you even if your lighting fails. we are saddened, whenever we see cheap clip-on reflectors – often paired with tiny LEDs. In fact, inferior materials are almost always used here. Ultimately, when the battery is empty, you realize a change is hardly worthwhile. Regarding cycling: Reflectors and bicycle lighting both form a system and should always be used together – you decide how much safety you need to feel comfortable cycling. Both increase your visibility for car drivers when riding at night.
The FLECTR CLIP reflector series is based on Erik Roby´s idea from 2016 and re-designed by our team with the experience of all our previous products. All products shown in our campaign are finished products from a pre-production, which do not differ in form and function from the items to be delivered.
In our workshop we have the capability to manufacture many products in their finished quality. Usually we start with a paper sketch, then the conversion follows by CAD. Then it goes to the machines.
Awards for FLECTR products: ISPO BRANDNEW FINALIST 2017 /// EUROBIKE AWARD WINNER 2017 /// GERMAN DESIGN AWARD WINNER 2018 /// GERMAN INNOVATION AWARD NOMINEE 2018 /// EUROBIKE AWARD WINNER 2018 /// EUROBIKE AWARD FINALIST 2019 /// GERMAN DESIGN AWARD NOMINEE 2020
21.12.2019 – end of campaign /// 27.12.2019 – you choose your rewards in our survey /// 5.1.2019 – start of FLECTR CLIP production /// 08.01.2020 – we receive your funds from Kickstarter/// 14.01.2020 – prepare all shipping data /// 20.01.2020 – quality control and packaging
Start of shipment: January 2020
After the campaign has ended we will process everything quickly and professionally. You will receive a survey invitation on the deposited e-mail. This survey only takes three minutes, ensures proper shipment and includes the choice of your rewards. Together with POST NL we are able to offer a reliable and well-priced solution. Your reward will be shipped insured and trackable. It requires signature on receipt. Please keep in mind that you are responsible for customs charges maybe if required by your country for importing goods.
Our partners:
This campaign is promoted by Jellop, the ad tech power behind the best Kickstarters with 750+ successful Kickstarter projects with over $330MM raised between them.
You are are one of our 13.000+ highly valued supporters we have already served (or will serve) here on Kickstarter. Since 2014 we are specialized in reflective products, and we have the experience to create a wonderful new product together with you. FLECTR CLIP is completely engineered and manufactured in Europe. We have well established relations to our suppliers for years and are able to take a look at the production process at any time, so we do not foresee any direct risks or challenges. In general we are committed to do everything in our power to deliver your FLECTR CLIP reflectors in time and keep you informed about all further processes in regular campaign updates. Of course, there can always be delays when a new product is first manufactured, but this risk is justifiable, because a crowdfunding campaign is not a purchase in an online shop. Let’s be clear: You will definitely not loose any money in this campaign, and we will thank you for your great support with exactly the items shown here.
Visit our Environmental Resources Center to learn how Kickstarter encourages sustainable practices.
FLECTR CLIP has an almost unlimited life span. For a product that only weighes 5 grams, FLECTR CLIP is extremely resource-saving in relation to its safety benefits.
The plastics used for FLECTR CLIP are of course completely recyclable.
Our reflectors are made in state-of-the-art production facilities under ISO 14001 certified environmental management systems. Energy efficiency is maximised by returning heat to the production process and the heating system.
All FLECTR products are packed in pure paper packaging without plastics and unnecessary blister bags. This minimizes the consumption of raw materials. The products are shipped without filling and padding materials. This sounds self-evident, but unfortunately it is NOT in the bicycle accessories trade. PVC blister bags are still frequentely used.
All production steps are carried out close to our company headquarters without long transport routes. We are currently applying for certification as a climate-friendly company and are working to compensate for the carbon footprint of our operations through climate-friendly projects.