Voltage Converter Company
Los Angeles, CA 90001, US
Industrial & Manufacturing
Voltage Converter Company is a leader among voltage converter manufacturer. Our main focus is creating the highest quality products. Voltage Converter Company is an United States voltage converter maker located in Los Angeles.
Voltage Converter Company is a leader among voltage converter manufacturer. Our main focus is creating the highest quality products. Voltage Converter Company is an United States voltage converter maker located in Los Angeles. Our company concentrates on voltage converter design and voltage converter manufacture. The main products are 110v to 220v voltage converter, 220v to 110v voltage converter, step up voltage converter, step down voltage converter and so on.
It’s very likely that you won’t require a voltage converter. However it would still be a good idea to double-check. Check the Chargers or Power Supplies of EACH device that you’ll be travelling with, looking for the words “Input Voltage”. If this specifies 100-240 VAC, 50/60 Hz, the products will work fine in Europe with only an inexpensive Plug Adapter. Which countries will you are visiting? Note that the Plug Adapters are different for the UK than on the continent. What’s the capacity (wattage) of the Voltage Converter you bought? If it’s a high wattage model (1600W+), it will use solid-state conversion methods. This should not be used with electronic products such as Camera Chargers, etc.!
The Voltage Converter shown in the link you posted should not be with electronic products, such as those mentioned by the OP. That type of Converter uses solid-state technology to reduce the voltage, rather than a Transformer and the output is not especially “clean”. When connected to a solid-state product such as a Camera Charger, unfortunate consequences can occur! Most manufacturers of electronic products such as cameras specifically recommend against using their products with that type of Converter. High wattage Voltage Converters are more appropriate for appliances with a simple resistive heating element and no electronic controls. However, some manufacturers of Flat Irons recommend against using ANY Voltage Converters with their products.