Swap pickups in 30 seconds with the strings still on! It’s time to replace your pickup rings with P-LINK and take control of your tone.
Replace your standard pickup rings with P-LINK and take control of your tone!
P-LINK is designed to be the new standard for guitar pickup installation. Developed as a direct replacement for standard humbucker mounting rings, P-LINK makes it possible to change pickups in 30 seconds with the strings still on. Swap a modern humbucker for a vintage humbucker or change to a single coil or Humbucker sized P90. Once a pickup is mounted into the P-Link pickup cradle and the housing is mounted into the guitar body you will only need your hands and half a minute of your time to change the pickup in your guitar. The beauty of this system is its simplicity and fool proof design.
The flexibility and affordable price tag of P-Link will see a new era in pickup combinations and tonal creativity
The Housing unit is installed into the Humbucker cavity in the top of your electric guitar. It has a 5 core cable that extends through the body of the guitar to the controls. The 5 wires allow for all sorts of options including the use of active or passive pickups and coil splitting. The housing requires a minimum cavity depth of 20mm.
Available for flat top and arch top guitars.
The cradle unit acts as the mounting ring for the pickup. The pickup wires are inserted into the screw terminals in the base of the cradle. Once the wires are in the terminals, the screws are tightened to clamp the wires in place. The cable can then be coiled up under the pickup as it is secured into position.
Although we already have manufacturing and fulfilment partners, there is always the risk that unforeseen obstacles may get in the way. If an issue does arise that will slow down production or shipment of your order, we will let our backers know ASAP.
We appreciate you being an early supporter of P-LINK and we will work hard to maintain your trust through communication and transparency.